Tuner Pro definitions (Nanocom and native byte order)

Please login to access content

Log in using the Donors link above to access downloads

Updates to the Donor XDF's

This package contains editors configured for Nanocom .map format files.
With minor changes these will work with any binary which uses native ECU byte ordering.
This includes BDM, MEMS3 Mapper/Flasher, Kess, and Galleto reads.

Version 3.3.2 2021-09-28

  • Bug fixes:
    • Correct z-axis units for EU3 "Pilot Inj - Fuel Compensation"
    • Restore missing table categories

Version 3.3.1a 2021-08-12

  • Bug fix: Correct MAF patch offset
  • Bug fix: Reinstate valid gear editors missing in 3.3.1
  • Add scalar editor:
    • cc_speed_incr sets cruise control button press increment.

Default value is 1.6kph (1 mph) per press. For regions where roadspeeds are kph setting to 1.0 will make adjusting cruise speeds less frustrating.

Version 3.3.1 2021-08-08

  • Repackage zips:
    • Nanocom [adaptable to native byte order formats]
    • MSB/NNN Full Bin [adaptable to reverse byte order formats]
  • Add scalar editors for default sensor values [informational]
  • Add scalar editors for three EGR values:
    • set egr_spd_disable to 0 to disable egr operation.
    • set egr_value_pwm_freq to 0 to disable EGR Modulator.
    • set egr_inlet_throt_freq to 0 to disable EGR Inlet.
  • Change Boost Control sub categories to split Waste Gate Modulator PI controller into a separate folder in Category View.

Version 3.3 2021-08-06

  • Add definitions for Pilot Inject tables on EU2 and EU3 engines.
  • Bug fix: Change bin length to avoid errors when editing tables.

Version 3.2 2020-08-08

  • Add secure programming plug-in.
  • Add checksum definitions for variant and tune.
  • Default item byte order setting now matches predefined items.
  • Fix scaling for axes and tables defined as integral gain.
  • Remove trailing underscore from definition display name
  • Fix tables with z axis incorrectly defined
  • Other changes no-one will notice...

Version 3.1 2019-09-16

  • Corrected scaling for tb_speed_cons
  • Corrected misalignment of MAF patcher when table offset was 5.
  • Correct IQ units on EU3 inject pulse width maps

Version 3.0 2019-09-11

  • Ground up rewrite of XDF building process.
  • Updated to TP XDF 1.60 definition.
  • Improved consistency of axis definitions.
  • Altered and corrected map naming.
  • Added valid gear ratio editor.
  • Add maf voltage limit editor.
  • Add maf, aap, iat editors.
  • lots of other stuff.

Version 2.1 2017-10-23

  • Fix issues with EU2 Defender map alignment
  • Minor alterations to map naming.
  • Minor alterations to axis naming.
  • other stuff...

Version 2.0 2017-08-22

  • Add SOI maps.

  • Add Smoke compensation maps. Note that EU3 maps use an adjust map and scaling map pair.
    The scaling map is a multiplier so if there is 0 in the scaling map the adjust output is 0.
    It's going to take me a bit of time to document so please be patient.
    Information will be posted when it is ready.

    • Add Air Conditioning load map.
    • Add Auto Torque Reduction IQ map.
    • Add Auto Engine Torque map.
    • Alter scalar naming.
    • Add Waste Gate Modulator control maps and scalars.
    • Add "hidden" Injector Idle Response map to EU2 XDFs.
    • other stuff...