Tuner Pro definitions (MSB and NNN byteswap)

Please login to access content

Log in using the Donors link above to access downloads

v3.3.1a donor XDF for Td5 MSB 131Kb and NNN 256kb byte swapped binary files.

This package of XDFs is configured for 131kb MSB and 256kb NNN binary files with reversed byte ordering. Kess V2 reads and EEPROM programmer dumps are typically saved in this format.

Version 3.3.2 2021-09-28

  • Bug fixes:
    • Correct z-axis units for EU3 "Pilot Inj - Fuel Compensation"
    • Restore missing table categories

Version 3.3.1a 2021-08-12

  • Bug fix: Correct MAF patch offset
  • Add scalar editor:
    • cc_speed_incr sets cruise control button press increment.\ Default value is 1.6kph (1 mph) per press. For regions where roadspeeds are kph setting to 1.0 will make adjusting cruise speeds less frustrating.

Version 3.3.1 2021-08-08

  • Repackage zips:
    • Nanocom [adaptable to native byte order formats]
    • MSB/NNN Full Bin [adaptable to reverse byte order formats]
  • Add scalar editors for default sensor values [informational]
  • Add scalar editors for three EGR values:
    • set egr_spd_disable to 0 to disable egr operation.
    • set egr_value_pwm_freq to 0 to disable EGR Modulator.
    • set egr_inlet_throt_freq to 0 to disable EGR Inlet.
  • Change Boost Control sub categories to split Waste Gate Modulator PI controller into a separate folder in Category View.

Version 3.3 2021-08-06

  • Add definitions for Pilot Inject tables on EU2 and EU3 engines.
  • Bug fix: Change bin length to avoid errors when editing tables.

Version 3.2 2020-08-08

  • Add secure programming plug-in.
  • Add checksum definitions for variant and tune.
  • Default item byte order setting now matches predefined items.
  • Fix scaling for axes and tables defined as integral gain.
  • Remove trailing underscore from definition display name
  • Fix tables with z axis incorrectly defined
  • Other changes no-one will notice...